Description
Wet Edge Extender WT900™ is a non-flammable additive with a wide range of compatibility, specifically formulated by Durable Concrete Coatings for our systems. Wet Edge Extender WT900™ will help with increasing the working time and workability of the product, especially at higher temperature weather conditions, or when applying large areas. The product helps to improve levelling, and reduces lap marking caused by the coating drying too quickly. Other than conventional thinners, Wet Edge Extender WT900™ is a high-performance product, low odour, which needs only a low rate of addition to work effectively.
Direction For Use: Refer to the technical data sheet. Add 1 – 5% of the Wet Edge Extender WT900™ by volume per 1L MIXED epoxy product. Only use with compatible Durable Concrete Coatings epoxy resin. The addition rate depends on project specific conditions such as air temperatures, substrate temperatures, product temperatures as well as airflow, and relative humidity. Do NOT exceed 5%.
Coverage: 1% – 5% by volume into compatible Durable Concrete Coatings mixed epoxy resins, or into mixed two pack epoxy systems with amine hardeners.
Clean Up: Absorb spill with absorbent material (vermiculite, sand, or similar). Refer to the technical data sheet for detailed information.
Size: 5L.
Features & Advantages
- Non Flammable
- Versatile application
- Low odour
- Minimal amount of product required
- Very effective
- Increases the working time
- Improves levelling
- Reduces lap marking
Recommended Use
- Water Based Epoxy WEP50 HB™
- Premium Epoxy EP100™
- Epoxy EP200™
- Polyurea PU100™
- Polyaspartic PS90™
- Urethane 2Pack™
- Durathane SP40™
- Aqua Urethane 2Pack™