Description
Epoxy EP200® 10L Kit is a high-performance product made up of a 100% solid, solvent-free, heavy-duty, two-pack epoxy resin matrix. Formulated to contain the latest technology and provide you with a quality stand-alone coat and binder for non-skid surfaces. With a higher chemical resistance epoxy resin, it is self-levelling, has strong cross-linking abilities, and high gloss finish. Specifically designed for commercial and industrial environments, however useful in residential.
Directions For Use: Refer to the technical data sheet. In general, the surface being treated MUST be clean and free of all traces of loose material, dirt, debris, mildew, oil, grease, old coatings, curing compounds, release agents, laitance and other contaminants, and any moisture. Mix Epoxy EP200® (3 Parts A) with Epoxy EP200® Hardener (1 Part B). Use a mechanical mixer to ensure thorough mixing. The mix ratio is 3:1 by volume.
Application: Lint-free Epoxy Roller, Brush or Squeegee.
Dry Times: Touch Dry: 2 – 4 hours, Re-Coat Time: 4 – 24 hours, Hard Dry/Light Foot Traffic: 12 – 18 hours, Full Cure: 7 days. All drying times depend on film thickness, ventilation, temperature, humidity, and application methods. A minimum of two coats is recommended.
Coverage: 5 – 10m2/L depending on the porosity of the substrate and application methods.
Clean Up: Clean all equipment with Solvent SLP100™. Refer to the technical data sheet for detailed information.
Size: 10L Kit
Disclaimer: This colour chart and any colour swatches are to be used as a GUIDE ONLY. The printed colours are reproduced as close as modern printing techniques allow. The finished colour may vary depending on products, surface variation, substrates, job conditions, textures and finishing practices. It is recommended to apply a sample to a small area of the substrate prior to the full application to confirm the desired colour accuracy. Durable Concrete Coatings ® Pty Ltd does not hold any liability or indemnity in relation to colour variations.