Description
Aqua Urethane 2Pack® 20L Matte is a water-based, non-yellowing, odourless, two-pack polyurethane sealer for concrete, flake floors, epoxy coatings, metallic epoxy, polished concrete (grind and seal) and exposed aggregate. Also suitable for walls. This high-performance polyurethane coating has excellent clarity and UV absorbers and scavengers. It provides an extremely tough and hard-wearing film and is used as a durable protective coating for high-traffic areas and commercial environments.
Direction For Use: Refer to the technical data sheet. In general, the surface being treated MUST be clean and free of all traces of loose material, dirt, debris, mildew, oil, grease, old coatings, curing compounds, release agents, laitance and other contaminants, and any moisture. Mix Aqua Urethane 2Pack® (4 Parts A) with Aqua Urethane 2Pack® Hardener (1 Part B). Use a mechanical mixer to ensure thorough mixing. The mix ratio is 4:1 by volume.
Application: Low-Pressure Spray, Lint-free Epoxy Roller or Brush.
Coverage: 8 – 12m2/L, depending on the porosity of the substrate, film thickness and application methods.
Dry Times: Touch Dry: 30 – 45 minutes, Re-Coat Time: 4 – 6 hours, Hard Dry/Light Foot Traffic: 24 hours, Full Cure: 7 days. All drying times depend on the film thickness, ventilation, temperature, humidity, and application methods. Two coats minimum are recommended.
Clean Up: Clean all equipment with Water. Refer to the technical data sheet for detailed information.
Size: 20L Kit