Description
This Water Based Epoxy Plain Floor UV System WEP50 UV 24 – 36m² kit is suitable for an epoxy floor coverage between 24 – 36m² and includes the following products;
Qty | Product Code | Size | Description |
2 | 401PL8 | 8L | Water Based Epoxy WEP50 HB™ – Tinted |
2 | 450PL20 | 4L | Urethane 2Pack™ Gloss |
We provide a selection of other top coats such as;
- Durathane SP40™ Gloss or Satin
- Aqua Urethane 2Pack™ Gloss or Matte
- Polyaspartic PS90™ Gloss
Durable Concrete Coatings® Water Based Epoxy WEP50™ two-pack epoxy resin matrix system is specially formulated as a high build, stand-alone coat. This product is suitable for residential, commercial, and industrial environments with excellent adhesion, durability and easy to maintain.
- Garages
- Patios
- Residential interior & exterior
- Bathrooms
- Restrooms
- Retail stores
- Shopping centres
- Salons
- Showrooms
- Veterinary clinics
- Laundromats
- Bars, pubs, and taverns
We also provide a variety of anti-slip additives which will adhere to Australian Standards anti slip rating requirements.
Our Patch & Anchor or Epoxy Crack Repair Paste EP100™ are highly regarded if your concrete needs repairing before applying your Epoxy Plain Coat UV System. Providing the best possible base for your floor covering is essential to ensure longevity to your Epoxy Plain Coat UV Project.
The material usage depends on porosity of substrate, application methods and the applied film thickness.
Coat | Product | Coverage |
Prime Coat (W/25% Of Water | Water Based Epoxy WEP50 HB™ | 8-10m² per L |
Base Coat (W/5% Of Water | Water Based Epoxy WEP50 HB™ | 6-7m² per L |
1st Top Coat | Urethane 2Pack™ Gloss | 6m² per L |
2nd Top Coat | Urethane 2Pack™ Gloss | 6m² per L |
Disclaimer: This colour chart and any colour swatches are to be used as a GUIDE ONLY. The printed colours are reproduced as close as modern printing techniques allow. The finished colour may vary depending on products, surface variation, substrates, job conditions, textures and finishing practices. It is recommended to apply a sample to a small area of the substrate prior to the full application to confirm the desired colour accuracy. Durable Concrete Coatings ® Pty Ltd does not hold any liability or indemnity in relation to colour variations