Description
Epoxy System Kit with Durathane SP40™
This Epoxy Systems WEP50 UV 70 – 80m² kit is suitable for an epoxy floor coverage between 70 – 80m² and includes the following product;
Qty | Product Code | Size | Description |
3 | 401PL8 | 8L | Water Based Epoxy WEP50 HB™ – Tinted |
1 | 447PLAGL | 20L | Durathane SP40™ Gloss |
We provide a selection of other top coats such as;
- Urethane 2Pack™ Gloss or Satin
- Aqua Urethane 2Pack™ Gloss or Matte
- Polyaspartic PS90™ Gloss
Durable Concrete Coatings® Water Based Epoxy WEP50™ two-pack epoxy resin matrix system is specially formulated as a high build, stand-alone coat. This product is suitable for residential, commercial and industrial environments with excellent adhesion, durability and easy to maintain.
- Garages
- Patios
- Residential interior & exterior
- Bathrooms
- Restrooms
- Retail stores
- Shopping centres
- Salons
- Showrooms
- Veterinary clinics
- Laundromats
- Bars, pubs and taverns
We also provide a variety of anti-slip additives which will adhere to Australian Standards anti slip rating requirements.
Our Patch & Anchor or Epoxy Crack Repair Paste EP100™ are highly regarded if you your concrete needs repairing before applying your Epoxy UV System. Providing the best possible base for your floor covering is essential to ensure longevity to your Epoxy UV Project.
The material usage depends on porosity of substrate, application methods and the applied film thickness.
Coat | Product | Coverage |
Prime Coat (W/25% Of Water | Water Based Epoxy WEP50 HB™ | 8-10m² per L |
Base Coat (W/5% Of Water | Water Based Epoxy WEP50 HB™ | 6-7m² per L |
1st Top Coat | Durathane SP40™ Gloss | 8-12m² per L |
2nd Top Coat | Durathane SP40™ Gloss | 8-12m² per L |
Disclaimer: This colour chart and any colour swatches are to be used as a GUIDE ONLY. The printed colours are reproduced as close as modern printing techniques allow. The finished colour may vary depending on products, surface variation, substrates, job conditions, textures and finishing practices. It is recommended to apply a sample to a small area of the substrate prior to the full application to confirm the desired colour accuracy. Durable Concrete Coatings ® Pty Ltd does not hold any liability or indemnity in relation to colour variations